ELEMENTS XPERT
FINISHING GLAZE is a high-performance, silicone free, hand polish which provides a deep gloss and lasting protection on refinish or original paints with exceptional clean off whether working on individual panels or whole cars. Used by hand or with a machine polisher and soft wool pad.

Directions
Shake well before use. Apply a line of FINISHING GLAZE directly onto horizontal panels or onto an applicator pad/cloth for vertical panels. Prime your pad or cloth to moisten it by adding some polish to it and spreading it around. With light to moderate pressure work the polish in a circular motion to spread and cover the panel. Leave to dry for at least 1 minute before removing excess polish with a polishing cloth. Buff with a clean cloth or wool pad to achieve maximum gloss shine. It is possible to apply to the entire vehicle before removing. 
Directions
To be used with an ELEMENTS MICRO FINE PAD and a polishing machine set to 1500rpm-1800rpm. Shake well before use. Begin by priming your pad. Then apply five evenly spaced out pee sized amounts of FINE CUT to your pad. Work on a small area at a time. With the machine turned off press the pad onto the panel at points to mark out a grid and spread the compound. With the pad flat to the panel start the machine, apply light pressure and begin by working the machine back and forth slowly across the marked out area working your way down with each pass. Once at the bottom of the area start to move the machine in the up and down direction slowly working the pad across the area with each pass. Move onto the next section. Work the area until the product starts to turn clear. Once complete wipe any residue away with an ELEMENTS Premium microfibre cloth. ELEMENTS STAY CLEAN, Quick detailer spray can also be used to help remove residue.

Directions
To be used with an ELEMENTS HEAVY CUT PAD or ideally first try an ELEMENTS MEDIUM CUT PAD and a polishing machine set to 1500rpm-1800rpm. Shake well before use. Begin by priming your pad. Then apply five evenly spaced out pee sized amounts of HEAVY CUT to your pad. Work on a small area at a time. With the machine turned off press the pad onto the panel at points to mark out a grid and spread the compound. With the pad flat to the panel start the machine, apply light pressure and begin by working the machine back and forth slowly across the marked out area working your way down with each pass. Once at the bottom of the area start to move the machine in the up and down direction slowly working the pad across the area with each pass. Move onto the next section. Once complete wipe any residue away with an ELEMENTS Premium microfibre cloth.  To further enhance the paint finish follow with STAGE 2 - ELEMENTS FINE CUT compound.